The Magnetic group is among the leading manufacturers of Linear Drive Systems. With subsidiaries in the United States, France, Denmark, Germany and more than 20 agents worldwide, Magnetic is able to offer a global network for all its products and services. More information about our products and services:
|
|||||||||||||
| » Magnetic Homepage | |||||||||||||
| Headquarter
Switzerland Magnetic Elektromotoren AG Oristalstrasse 97 CH-4410 Liestal Tel: +41 61 925 41 11 Fax: +41 61 921 37 04 |
|||||||||||||
linear actuators
Link Link Link Link Link Link Link Link Link Link Link Link Link Link Link
SKF actuation systems, telescopic actuators, linear drives, telescopic drives, control unit, medical, matrix, telemag, telesmart, Magnetic AG, Magnetic GmbH, Liestal, Maulburg, ISO 9001, EN/ISO 9001
The Ecomag is a new linear actuator system used predominately in the medical and home environment. The Ecomag linear drives are attractively priced without making any compromises in terms of safety and reliability. This Ecomag product line is based on a modular system consisting of linear drives covering various force and stroke requirements, a selection of control solutions and accessories. The Ecomag features a reliable worm gear motor with a threaded spindle. The actuator is maintenance free for the duration of its service life. The characteristics of the permanent magnet motor are that the travel speed depends on the amount of load. The actuator is protected against overheating by means of an integrated overload cutoff feature (optional in standard housing). The lifting and mounting dimensions are available in increments of 50 mm over the range of 50 to 300 mm. The lift is limited with the help of built-in limit switches. The push versions ECO 20 and ECO 60 are equipped with front and rear fork heads made out of Polyamide. The push/pull versions ECO 30 and ECO 70 are equipped with a steel push tube and fork heads made out of metalThe VARIMAG Micro 92 chain actuator is a very cheap and reliable chain actuator which is ideal for top or bottom hinged windows. Available in 24 VDC and in 230 V AC. ontrol Unit
There are control units for day to day ventilation, by which you can connect rain, wind or temperature sensors in order to move the windows when sensors are activated.Application Micro 92 actuator mounted in a bottom hinged window. The VARIMAG MLA and MXL chain actuators are used when heavy top or buttom hinged windows, domes or skylights must be opened. Available in 24 VDC and in 230 V AC.The VARIMAG MSM actuator is a very small and well designed chain actuator. It can be used for the window applications where a pleasant appearence is requested. Thanks to the electronic end of stroke system, a regulator isn´t required. Available in 24 VDC. Control Unit
There are control units developed especially for the VARIMAG MSM 24 VDC actuator. It is possible to control the actuators with rain sensors or with a portable infrared transmitter. Also available is an adequate power unit and a battery loader to actuate the windows in case of power failure.The MAGRACK 1S9 tooth rod actuators are made for windows, skylights and domes as well as for smoke exhausting systems. Available in single or tandem versions and in 24 VDC or 230 V AC. Control Unit
A complete range of control units ist available for the Magrack actuator with 24 VDC. Control units for the day to day ventilation as well as for smoke exhausting systems are available.