MATRIX MAX 10,  MAX 30,  MAX 60 MATRIX This line of powerful DC actuators was developed for the medical sector but can also be found in many different furniture and industrial applications. KOM - Control Units The line of Matrix actuators is complimented by the KOM control units, which allow a flexible and more application focused system control. KOM control units are ideal to handle low-voltage control for simple tasks or microprocessor technology for complex control solutions. Applications Matrix actuators have been successfully integrated in applications such as hospital beds, therapy couches, patient lifters etc. where product and single fault safety are important requirements. Due to its robust and reliable design, Matrix represents the perfect solution for many complex industrial applications.   How does it work? The Matrix linear drives are equipped with an electric motor, worm gearing and a lead screw unit. The rotary movement of the motor is converted with the help of the worm gear into an axial movement. The rotation of the lead screw is transferred to a thrust tube with integrated special nut. The Matrix linear drives are characterized by very quiet running and are maintenance free. They take up little space and can be installed at virtually every angle and in vertical or horizontal position. They are technically less complicated and guarantee greater operational safety than pneumatic or hydraulic cylinders.         MATRIX MAX 10 Technical data MAX 1..A.. MAX 1..B.. MAX 1..C..   Push/pullforce 4000 N 2000 N 1500 N   Speed at nominal load 6 mm/sec. 7 mm/sec. 14 mm/sec.   Stroke length min. 50-700 mm min. 50-700 mm min. 50-700 mm   Voltage (50 Hz) 24 V= 24 V= 24 V=   Power consumption 120 W 120 W 120 W   Current consumption 24 V = 4.8 A 5 A 5 A   Duty cycle: Intermittant mode 1 min./9 min. 1 min./9 min. 1 min./9 min.   Ambient temperature 0 / +40 °C 0 / +40 °C 0 / +40 °C   Degree of protection 66 IP 66 IP 66 IP   Weight 3.5 kg 3.0 kg 3.0 kg   Datasheet (PDF) Datasheet MAX 10     Further Information Operating Manual Matrix MAX1 / MAX3     MATRIX MAX 30 Technical data MAX 3..A.. MAX 3..B.. MAX 3..C..   Push/pullforce 8000N / 6000N* 4000 N 3000 N   Speed at nominal load 6 mm/sec. 7 mm/sec. 14 mm/sec.   Stroke length min. 50-700 mm min. 50-700 mm min. 50-700 mm   Voltage (50 Hz) 24 V= 24 V= 24 V=   Power consumption 120 W 120 W 120 W   Current consumption 24 V = 5 A 5 A 5 A   Duty cycle: Intermittant mode 1 min./9 min. 1 min./9 min. 1 min./9 min.   Ambient temperature 0 / +40 °C 0 / +40 °C 0 / +40 °C   Protection class/ Insulation class I/B I/B I/B Degree of protection 66 IP 66 IP 66 IP   Weight 4.5 kg 4.0 kg 4.0 kg     *Max. load for medical applications 5000N       Datasheet (PDF) Datasheet MAX 30     Further Information Operating Manual Matrix MAX1 / MAX3     MATRIX MAX 60 Technical data MAX 6..A.. MAX 6..B.. MAX 6..C..   Push/pullforce 8000N / 6000N* 4000 N 3000 N   Speed at nominal load 6 mm/sec. 8 mm/sec. 15 mm/sec.   Stroke length min. 50-700 mm min. 50-700 mm min. 50-700 mm   Voltage (50 Hz) 230 V~ 230 V~ 230 V~   Power consumption 175 W 190 W 190 W   Current consumption 24 V = 0.9 A 0.9 A 0.9 A   Duty cycle: Intermittant mode 1 min./9 min. 1 min./9 min. 1 min./9 min.   Ambient temperature 0 / +40 °C 0 / +40 °C 0 / +40 °C   Protecton class/ Insulation class I/B I/B I/B Degree of protection IP 66 IP 66 IP 66   Weight 5.5 kg 5.0 kg 5.0 kg     *Max. load for medical applications 5000N       Datasheet (PDF) Datasheet MAX 60     Further Information Operating Manual Matrix MAX6