ECOMAG   ECOMAG The Ecomag is a new linear actuator system used predominately in the medical and home environment. The Ecomag linear drives are attractively priced without making any compromises in terms of safety and reliability. This Ecomag product line is based on a modular system consisting of linear drives covering various force and stroke requirements, a selection of control solutions and accessories. SEM - Control Units The Ecomag product line can be operated with three different control solutions equipped with integrated transformers and rectifiers. The SEM control unit can be mounted directly to the Ecomag housing, eliminating the need for a separate installation of the control box. For more demanding control solutions (i.e. microprocessor), the Ecomag actuators can be combined with the KOM control units. The VIF controls (i.e. infrared), provide another attractive addition to the Ecomag line of actuators for the home and furniture environment. Applications The Ecomag actuators allow comfortable movements ensuring precise and ergonomically correct positioning of patients Ecomag actuators enhance to general well-being of patients. The safety and reliability of Magnetic actuator systems is highly appreciated by both the patients and their care staff.     How does it work? The Ecomag features a reliable worm gear motor with a threaded spindle. The actuator is maintenance free for the duration of its service life. The characteristics of the permanent magnet motor are that the travel speed depends on the amount of load. The actuator is protected against overheating by means of an integrated overload cutoff feature (optional in standard housing). The lifting and mounting dimensions are available in increments of 50 mm over the range of 50 to 300 mm. The lift is limited with the help of built-in limit switches. The push versions ECO 20 and ECO 60 are equipped with front and rear fork heads made out of Polyamide. The push/pull versions ECO 30 and ECO 70 are equipped with a steel push tube and fork heads made out of metal.     ECOMAG Technical data ECO 20 ECO 60 ECO 30 ECO 70 Pushforce 2000 N 6000 N 2000 N 6000 N Pullforce - - 2000 N 6000 N Speed (depending on load with SEM control) 9-13 mm/sec. 4-7 mm/sec. 9-13 mm/sec. 4-7 mm/sec. Stroke length 50-300 mm 50-300 mm 50-300 mm 50-300 mm Voltage 24 V= 24 V= 24 V= 24 V= Power consumption 70 W 120 W 70 W 120 W current drain 24 V = approx. 3 A approx. 5 A approx. 3 A approx. 5 A Duty cycle 1 min. ON/9 min. OFF     Ambient temperature operation +10 / +40 °C +10 / +40 °C +10 / +40 °C +10 / +40 °C Degree of protection IP x 4 IP x 4 IP x 4 IP x 4 Weight 2.1 kg 2.1 kg 2.5 kg 2.5 kg Datasheet (PDF) Datasheet ECOMAG     Further Information Operating Manual Ecomag