VARIMAG 1MSM1MLA1MXL1M92 VARIMAG The VARIMAG MSM actuator is a very small and well designed chain actuator. It can be used for the window applications where a pleasant appearence is requested. Thanks to the electronic end of stroke system, a regulator isn´t required. Available in 24 VDC. Control Unit There are control units developed especially for the VARIMAG MSM 24 VDC actuator. It is possible to control the actuators with rain sensors or with a portable infrared transmitter. Also available is an adequate power unit and a battery loader to actuate the windows in case of power failure. Application     VARIMAG 1MSM Technical data 1MSM...900A00       Pushforce 200 N Pullforce 200 N       Speed (without load) 10 mm/sec. Stroke length max. 250 mm        Voltage 24VDC Power consumption 24 W       Current consumption 1 A Duty cycle 50 %         Ambient temperature - 5 / +50 °C Degree of protection IP 42/E       Weight 1.2 kg              VARIMAG MLA - MXL The VARIMAG MLA and MXL chain actuators are used when heavy top or buttom hinged windows, domes or skylights must be opened. Available in 24 VDC and in 230 V AC. .   VARIMAG 1MLA Technical data 1MLA...140A00 1MLA...920A00     Pushforce 350 N 350 N Pullforce 350 N 350 N     Speed (without load) 15 mm/sec. 15 mm/sec. Stroke length max. 380 mm max. 380 mm      Voltage 230/50 V/Hz 24 V cc Power consumption 138 W 36 W     Current consumption 0.6 A 1.5 A Ambient temperature - 5 / +50 °C - 5 / +50 °C     Degree of protection 42 / I /E IP 42 / III /E IP     Weight 1.5 kg 1.5 kg                   VARIMAG 1MXL Technical data 1MXL...140A00 1MXL...920A00     Pushforce 400 N 400 N Pullforce 400 N 400 N     Speed (without load) 20 mm/sec. 20 mm/sec. Stroke length max. 600 mm max. 600 mm      Voltage 230/50 V/Hz AC 24 V /DC Power consumption 160 W 48 W     Current consumption 0.7 A 2.0 A Duty cycle 15 % 15 %       Ambient temperature - 10 / +50 °C - 10 / +50 °C Degree of protection IP 42/E IP 42/E     Weight 2 kg 2 kg             VARIMAG 1M92 The VARIMAG Micro 92 chain actuator is a very cheap and reliable chain actuator which is ideal for top or bottom hinged windows. Available in 24 VDC and in 230 V AC. Control Unit There are control units for day to day ventilation, by which you can connect rain, wind or temperature sensors in order to move the windows when sensors are activated. Application Micro 92 actuator mounted in a bottom hinged window.      VARIMAG 1M92... Technical data 1M92...100... 1M92...900....     Pushforce 150 N 150 N Pullforce 300 N 300 N     Speed (without load) 40 mm/sec. 40 mm/sec. Stroke length 250-380 mm 250-380 mm      Voltage 230/ 50 V/Hz/ AC 24 VDC Power consumption 150 W 48 W     Current consumption 0.65 A 2.2 A Duty cycle 20 % 20 %       Ambient temperature - 20 / +40 °C - 20 / +40 °C Degree of protection IP 20 IP 20     Weight 1.8 kg 1.8 kg